How Do I Clean a Blender? 5 Steps To Keep Your Blender Looking and Running Like New!

Do you ever find yourself wanting to start making smoothies or sauces but hesitate because of the dreaded cleanup afterwards? We’ve all been there. The thought of tackling the remnants of thick, sticky blends or the dread of tiny particles trapped under the blade can make us think twice about whipping up our favorite recipes.

Cleaning a blender might seem daunting at first, especially with the risk of cutting your fingers on the sharp blades. But what if there were simpler and safer ways to ensure your blender shines like new after every use? Believe it or not, with a few handy tricks and techniques, the cleaning process can become effortless and quick.

With consistent cleaning habits and the right techniques, you can ensure your blender remains spotless and ready for any recipe. So, break out those fruits and vegetables from the refrigerator because, with the guidance to come, you’ll be blending and cleaning like a pro in no time.

The Basic Rinse – Making Cleaning a Habit

Every time I use my blender, I’ve developed a quick routine to avoid those difficult to clean messes later on. Right after using, fill the blender jar with warm water, add just a drop of dish soap, put the lid back on, and run the blender for a few seconds.

This simple action can whisk away most of the leftover smoothie or sauce. Once done, give it a rinse with warm water, and you’re good to go! This way of cleaning is super efficient and makes deeper cleaning less frequent.

How To Clean A Blender Step-By-Step

How To Clean A Blender Step-By-Step

Below are the steps you can follow to learn how to clean your blender:

Step 1: Immediate Rinse

Supplies Needed: Warm water.

Right after blending your favorite smoothie or sauce, always give your blender jar a quick rinse. Fill the blender jar halfway with warm water and swirl it around a bit. This immediate action will prevent residues from drying and make the cleaning process much simpler. I recommend always doing this rinse, even if you plan on deep cleaning later.

Step 2: Deep Clean Your Blender with Soapy Water

Supplies Needed: Warm water, 2-3 drops of dish soap.

For a more thorough cleaning:

  1. Start by filling the blender up to halfway with warm water. This will help to create a perfect environment for cleaning.
  2. Add a couple of drops of your favorite dish soap. The soap will work its magic and help to remove any stubborn residue or stains.
  3. Once you’ve added the dish soap, put the lid on securely. This ensures that no water or soap spills out during the cleaning process.
  4. Now, it’s time to run the blender for about 10 seconds. This will allow the warm, soapy water to circulate and clean all the nooks and crannies of the blender jar.
  5. After running the blender, carefully pour out the soapy water. Make sure to rinse the blender jar thoroughly with clean water to remove any remaining soap residue.

Step 3: Tackling Stains with Baking Soda

Supplies Needed: 2 teaspoons of baking soda and warm water.

If you notice stubborn stains or lingering odors:

  1. Add 2 teaspoons of baking soda to the blender jar.
  2. Fill it up with warm water.
  3. Blend for about 10 seconds to let the baking soda scrub and deodorize the interior.
  4. Rinse thoroughly after this step.

Step 4: Cleaning Blender Blades Safely

Supplies Needed: Dish soap, sponge or brush, warm water.

The blades are crucial and can be tricky:

  1. Detach the blender blades from the jar, if possible.
  2. Use warm, soapy water and a sponge or brush to gently scrub between the blades. Be very cautious to avoid cuts.
  3. Rinse the blades thoroughly with warm water.

I recommend always hand washing the blades to ensure they remain sharp and effective.

Step 5: Caring for the Blender Base

Supplies Needed: Damp cloth or sponge, a drop of dish soap (if needed).

The blender base may not come in direct contact with your blends, but it can still get messy:

  1. Always ensure the blender is unplugged.
  2. Use a damp cloth to wipe down any spills or residues.
  3. For stubborn spots, a drop of dish soap on the cloth can help.
  4. Wipe down with a clean, damp cloth to remove any soap.

Dishwasher Or Hand Wash?

While many modern blenders come with dishwasher safe parts, I recommend hand washing, especially for the blades. The dishwasher can dull or damage the blender blades over time, affecting their performance. The blender jar can go in the dishwasher, but make sure to rinse off any thick or sticky residue first. However, always check the manufacturer’s instructions to be sure.

Tips for Keeping Blenders Clean and Fresh

Tips for Keeping Blenders Clean and Fresh

In addition to the following general tips, it is highly recommended to check your owner’s manual for any special cleaning recommendations specific to your blender model.

1. Over time, stains and odors can accumulate in the blender jar, affecting both its appearance and performance. For such situations, natural ingredients like baking soda and white vinegar come to the rescue.

  • Baking Soda: This is a natural deodorizer and abrasive. Add 2 teaspoons of baking soda to the blender jar, fill it up with warm water, and blend for about 10 seconds. Then, rinse thoroughly.
  • White Vinegar: Mix equal parts of white vinegar and warm water in the blender jar. Let it sit for a few minutes and then run the blender for about 30 seconds. This not only helps in removing stains but also in decalcifying the jar, especially if you live in an area with hard water.

2. Many blender lids are designed to come apart into two pieces for easy cleaning. To determine if your blender lid can be disassembled, refer to your owner’s manual. If it can be taken apart, make sure to detach both pieces and clean them separately. This meticulous approach will effectively remove any stubborn food residue hiding in the crevices of the lid.

3. When it comes to cleaning glass and plastic jar blenders, it’s important to note that washing them in the dishwasher may cause etching and scratching. To preserve the appearance and longevity of your blender, hand washing is the preferred method. Not only is it quicker, but it also ensures the safety of your blender while keeping it spotless.

4. Have you ever noticed lingering odors in your blender after blending certain foods? One effective solution is to avoid storing items in the blender itself. By preventing food from sitting in the blender, you can minimize any unpleasant smells. However, if you already have a smelly blender, here’s a quick fix: blend equal parts baking soda and water in the blender, and let the solution sit for five to 10 minutes before washing it as usual. This simple trick can help eliminate unwanted odors.

5. For those stubborn stains or persistent odors that seem hard to tackle, vinegar can be your secret weapon. Fill the blender jar halfway with a mixture of equal parts white vinegar and water. Ensure the lid is securely in place, and run the blender for 30 seconds.

Afterward, empty the blender and rinse it thoroughly. This vinegar cleaning method is highly effective in removing tough stains and neutralizing any lingering odors, leaving your blender fresh and ready for use.

Frequently Asked Questions – FAQs

1. What’s the best way to clean a blender quickly?

After using your blender, a quick way to clean the blender is to fill the blender jug with about 1-2 cups of water and add a squirt of dish soap. Turn it on for a few seconds, then rinse it out. This method helps to quickly and easily clean any leftover residue.

2. Why is it essential to clean the blender right after use?

When you clean it right after use, it prevents residues from drying and becoming difficult to clean. Moreover, it avoids bacterial growth, ensuring that your next blend remains uncontaminated.

3. Are there eco-friendly liquids to clean the blender?

Yes, vinegar, baking soda, and dishwashing soap are effective and eco-friendly options for cleaning blenders. These substances can break down stubborn residues that might be difficult to clean.

4. Are some blender components more difficult to clean than others?

Yes, components like the blade assembly can be more difficult to clean due to their sharp edges and tight spaces. Ensuring you disassemble and rinse each part is crucial for a thorough clean.

5. Why is my blender jug always foggy after cleaning?

Blenders can develop a foggy appearance over time due to mineral deposits from water or residue from certain ingredients. To combat this, an occasional deep clean using vinegar or baking soda can help restore its clarity.

Conclusion – A Few Final Thoughts!

Maintaining the cleanliness of your kitchen equipment is paramount for health and efficiency, and blenders are no exception. To easily clean a blender, it’s advisable to rinse it immediately after use, preventing any residue from drying up. 

However, if deeper cleaning is required, filling the blender jug halfway with warm water and a few drops of dish soap, then giving it a quick blend, proves to be an effective way to clean your blender thoroughly. By adopting these simple habits, not only do you ensure the longevity of your appliance, but you also guarantee that every blend is as fresh and hygienic as possible.

5 1 vote
Article Rating
Inline Feedbacks
View all comments
Would love your thoughts, please comment.x